The YC series alcohol-based coatings have excellent properties and are widely used in casting production. The YC series alcohol-based coatings are complete in variety and suitable for various sand molds such as resin sand, water glass sand and clay sand, allowing for the production of a wide range of castings with different materials.
0536-6427866
Shandong Yongchuang Material Technology Co., Ltd
Product advantages
It has excellent thixotropy and flowability, and the coating has no brush marks.
Good suspension stability and easy operation.
The small amount of gas emission can reduce the generation of casting porosity defects.
Good anti-sticking, the surface of the casting is smooth and easy to clean.
Usage method
1. First, open the paint bucket, use a portable pneumatic agitator or other tools to stir the paint evenly, and use a Baume meter to detect the Baume degree of the paint.
2. According to the coating method on site, adjust the density and viscosity of the coating by dilution, and then carry out the coating operation.
3. First, use a pneumatic gun to blow off the residual sand on the surface of the sand mold, then apply the coating evenly onto the surface of the sand mold in the order from top to bottom and from left to right, ensuring that the coating thickness is uniform and consistent without any local areas that are too thin or too thick; otherwise, thicker areas of the coating are prone to cracking and bubbling when ignited, while thinner areas are likely to stick sand or are difficult to clean. Depending on the casting, the coating thickness is typically controlled between 0.3~0.5mm.
4. The coating is suitable for spraying, brushing, flow coating and dip coating.
Specifications and models
| Type | Density g/cm³（25℃） | Viscosity （∅6，25℃） | 2 hour suspension rate ≥% | Color | Applicable materials | |
|---|---|---|---|---|---|---|
| RT-01 | 1.16-1.33 | 13.0-18.0 | 98 | Black | Small and medium-sized gray iron and ductile iron parts | |
| RT-02 | 1.18-1.36 | 13.7-18.0 | 96 | Red | Generally gray iron and ductile iron parts | |
| WT-01 | 1.37-1.50 | 13.2-18.0 | 93 | White | Grey iron and ductile iron parts below 20 tons | |
| GT-01 | 1.50-1.90 | 12.7-20.0 | 96 | White | Carbon steel and alloy steel parts | |
| Quality guarantee period | 6 months | |||||
| Remarks | All kinds of coatings can be supplied in powder, paste, paste and wet form, and special products can be developed according to the special needs of customers to meet the production requirements | |||||
Service telephone
WeChat Official Account
